Skip to main content
Help

Site Navigation

Your Account

Choose Language

Revision to Kossel Pro

Terence Tam

The instructions below are given specifically for the Kossel Pro machine. The Reprap branch also follows the same build sequence.
 
# Build the ball joints first. Both the2015.07.02: ttstam:

For
Kossel Pro andkits with kit # ZT-KIT-00255, the Reprap build requires "borrowing"ball joints are already pre-glued on a piece of extrusion from the frame kit to build themachined fixture for building theyou. These ball joints. If youjoints are going to be buildingin a lot of Kossels, consider buying a dedicated length of OpenBeam to buildbox labelled Kossel Common Core Component Kit. Please disregard the fixture from.
** Fixture Instructions | Ball Joints Instuctions
ball joint gluing instructions.
# Build the ball joints first. Both the2015.07.02: ttstam:

For
Kossel Pro andkits with kit # ZT-KIT-00255, the Reprap build requires "borrowing"ball joints are already pre-glued on a piece of extrusion from the frame kit to build themachined fixture for building theyou. These ball joints. If youjoints are going to be buildingin a lot of Kossels, consider buying a dedicated length of OpenBeam to buildbox labelled Kossel Common Core Component Kit. Please disregard the fixture from.
** Fixture Instructions | Ball Joints Instuctions
ball joint gluing instructions.
# Build the Linear Drive Towers next, as it requires borrowing the upper machined vertex from the Upper Triangle sub assembly for spacing the end stop holders.
 
# Build the following sub assemblies first; these sub assemblies require gluing, and it is a good idea to get through the gluing process, then pause / work on another sub assembly, until all the gluing is complete. For best results, allow 24 hours for the Loctite 410 adhesive included in the kit to dry / de-gas, before proceeding.
** Auto Levelling Probe

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes