Got it. Made room in the body of the printer to accommodate new stop points on the proximity sensors.
Install went well! Thanks for your feedback. I have a new issue, though.. Due to the height and placement of the hot end, my z-axis home does not go high enough to make contact with the extruder tip (despite option to turn knobs to bring build plate higher). It also is too far back in the cavity, causing the (?)y-axis home to put the extruder tip off the back of the build plate. How can I alter these values? Again your assistance is greatly appreciated!
If I am going to be upgrading my dual extruder replicator 2x, but I will be ‘retiring’ the second extruder anyway, do I need to use the dual extruder stl file for the mount? or can I perform this upgrade with the standard Mount B with the intention of ending with a single extruder setup? don’t want to waste a print.
Is the EZ Struder aspect mandatory for this upgrade on the Replicator 2/2x?
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.