Skip to main content

Site Navigation

Your Account

Choose Language

Notice: This guide has unpatrolled modifications. Before continuing, you should patrol pending changes.

Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.


Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.


Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.


Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Wire strippers
  • 1 × Wire cutters
  • 1 × 1.5mm hex key
  • 1 × 2 mm Hex Driver
  • 1 × 2.5 mm Hex Driver
  • 1 × 3mm hex key
  • 1 × 4mm hex key
  • 1 × Soldering iron
  • 1 × 7mm wrench
  • 1 × 20mm wrench
  • 1 × Phillips screwdriver
  • 1 × Assembled E3D v6 HotEnd
  • 1 × E3D Hotend Mount for Lulzbot TAZ5 and Lulzbot Mini
  • 1 × Lulzbot Mini Layer Cooling Fan Shroud for E3D v6
  • 6 × Molex Male 22-24 AWG Terminal Pin
  • 2 × M2 Heat Set Insert
  • 2 × M3 Heat Set Insert
Add New

Your contributions are licensed under the open source Creative Commons license.