Skip to main content
Help

Site Navigation

Your Account

Choose Language

Editing Step 5 —

Step Type:

Drag to rearrange

Remove the following wires from the harness:

Pins 5, 6: Two (thick red) to the heater cartridge

Pins 9, 10: Two (thin, one black and one red) to the heat sink blower fan

Pins 17, 18: Two (thin, one black and one red) to the hotend thermistor

To remove a pin, push in on the small metal tab on the side of the harness then push down on the pin with a flat object and pull the wire free.

Pin diagram from Lulzbot's documentation: http://download.lulzbot.com/Mini/1.0/oha...

Your contributions are licensed under the open source Creative Commons license.