Go to Tools > Processor and choose "ATmega 1284 or ATmega 1284P (16 MHz)"
Go to Tools > Port and select the port for your AVR Programmer. If you have no other 3D printers or other serial devices connected to your computer, then your AVR programmer will be on the only port in the list.
Go to Tools > Programmer and choose your type of AVR programmer from the list. If you are unsure of which type to choose, consult the instructions that came with your programmer.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.