Skip to main content
Help

Site Navigation

Your Account

Choose Language

Step Type:

Drag to rearrange

Strip 2 cm from the ends of the yellow and purple wires that were connected to the original heat sink fan.

Cut two pieces of 3 cm long heat shrink tubing and slide them onto the yellow and purple wires.

Twist the yellow and purple wires to the red and black wires from a connector you prepared in the last step.

Yellow goes to red.

Purple goes to black.

Solder the connections.

Slide the heat shrink tubing down over the connections and use a heat gun to shrink it.

Your contributions are licensed under the open source Creative Commons license.