Use an M2x6 screw in the top right of the layer cooling fan to attach it to the mount.
Slide the duct onto the bottom of the fan and use another M2 screw to attach the bottom right side of the fan to the mount.
Use a third M2 screw and an M2 nut to hold the left side of the duct to the fan.
You can reuse the screws that originally held the fan on.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.