Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 7 —

Step Type:

Drag to rearrange

Depending which iteration of the TAZ 5 you have, a "TAZ 5 0.5mm Nozzle" sticker may need to be removed for this step.

Remove the following pins from the extruder assembly-side wiring harness:

Pins 5 & 6: Heater cartridge

Pins 9 & 10: Blower fan

Pins 15 & 16: Thermistor

To remove a pin, push in on the small metal tab on the side of the harness with a sharp object, then push down on the end of the pin with a flat object and pull the wire free.

Pin diagram from Lulzbot's documentation:

Your contributions are licensed under the open source Creative Commons license.