Find a way to tie some string to your print, in order to hang it.
For this example I am using a fan shroud from a TAZ. It has holes on the back for screwing bolts into. I screwed a bolt into one hole and then tied the string to the bolt.
Remember that the string will get stuck to any part of the object it is touching.
I tied another piece of string across the top of the can. This is what the part will hang from.
The part should be suspended roughly in the center of the can. Make sure it is high enough that it won't be touching the acetone we will pour in.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.