Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 4 —

Step Type:

Drag to rearrange

Pull enough tape off the roll to cover the entire bed, plus plenty of extra.

Be careful not to let the tape get stuck to itself. You may need someone to help you at this point to hold the sheet as you cut it from the roll.

Lay the tape down on the glass. The soap will prevent it from sticking and allow you to slide it around to get it in the right position.

When you have the tape aligned correctly, stick the overhanging edges to the workbench below. This will hold the tape in place during the following steps.

Your contributions are licensed under the open source Creative Commons license.