Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 5 —

Step Type:

Drag to rearrange

Be careful about where you grab your object. Remember that the part under your fingers will not be coated.

It might be better to stick your fingers to the back of the object using double sided tape, instead.

Slowly dip the object into the water at an angle. Avoid dipping flat surfaces straight in since it can cause air bubbles.

Push the object all the way through the film so that it is completely submerged, then shake it to break off the excess film.

With the object still underwater, use your other hand to clear away the extra bits of film. Then turn the object upside down and pull it back up.

Your contributions are licensed under the open source Creative Commons license.