Skip to main content
Help

Site Navigation

Your Account

Choose Language

Editing Step 15 —

Step Type:

Drag to rearrange

Open the Repetier.ino file in the Arduino IDE version 1.0.6 and edit Configuration.h:

Change the value of EXT0_TEMPSENSOR_TYPE to 8. The line should read:

#define EXT0_TEMPSENSOR_TYPE 8

Change the value of MAXTEMP to 300. The line should read:

#define MAXTEMP 300

Upload the edited firmware to the printer.

Your contributions are licensed under the open source Creative Commons license.