Since most people do not have calipers that can measure 300mm (~12”), we’ve designed the fixture block to space the pin centers correctly when attached to a piece of 360mm extrusions (the width of the Kossel Pro triangular extrusions).
Line up the edge of the plastic bracket to the cut face on the extrusion. This will set the pin centers to be 300mm +/- 0.3mm (cut accuracy on the extrusion).
Secure fixture blocks with M3 x 8mm SHCS.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.