Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #28

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* black] Install the newly wired pins into the harness using the diagram from disassembly.
[* black] The new E3D heatsinkheat sink fan wires correlate to pins 9 and 10.
[* black] The new E3D heatsinkheat sink fan wires correlate to pins 9 and 10.
[* black] The new heater cartridge wires correlate to pins 5 and 6.
[* black] The nozzle ground wire is reinstalled into pin 16.
[* black] The layer cooling fan wires correlate to pins 7 and 8
[* black] The thermistor wires correlate to pins 17 and 18.