Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #27

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* black] ReattachUsing a 1.5mm hex key, reattach the X axis end stop to the layer cooling fan shroudshroud with the two M2 screws from earlier.
[* black] ReattachUsing a 2.5mm hex key, reattach the layer cooling fan with the two M3 screws from earlier.
[* icon_caution] Make sure
the wires are oriented upup towards the top of the extruder assembly.
[* black] ReattachUsing a 1.5mm hex key, reattach the X axis end stop to the layer cooling fan shroudshroud with the two M2 screws from earlier.
[* black] ReattachUsing a 2.5mm hex key, reattach the layer cooling fan with the two M3 screws from earlier.
[* icon_caution] Make sure
the wires are oriented upup towards the top of the extruder assembly.