Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #23

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* black] Insert the hotend and plate assembly into the carriage plate as shown.
[* icon_note] The hotend will fit but the heatsinkheat sink shroud will rub against the inside curve of the carriage plate. Not to worry-- the screwsbolts in the next step will hold everything together.
[* icon_note] The hotend will fit but the heatsinkheat sink shroud will rub against the inside curve of the carriage plate. Not to worry-- the screwsbolts in the next step will hold everything together.