Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] Extract the insetsinserts for reuse
[* icon_note] If you have extra M2 and M3 insetsinserts, you can skip this step.
[title] Extract the insetsinserts for reuse
[* icon_note] If you have extra M2 and M3 insetsinserts, you can skip this step.
[* icon_note] This step is best done with the shroud in a bench vice.
[* black] Using the soldering iron, heat up one of the screws until you can pull both it and the insetinsert out of the stock shroud.
[* black] Repeat for the other three screws and insetsinserts.
[* icon_caution] Before handling, wait until the screw and insetinsert cool completely or dip them into water to cool them more quickly.
[* black] Using the soldering iron, heat up one of the screws until you can pull both it and the insetinsert out of the stock shroud.
[* black] Repeat for the other three screws and insetsinserts.
[* icon_caution] Before handling, wait until the screw and insetinsert cool completely or dip them into water to cool them more quickly.