Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Wait until the screw and inset cool completely, or dip them into water to cool more quickly.
[*
black] Insert the heat set insertsinset into the layer cooling fan shroud with a soldering iron.
[* icon_caution] Wait until the screw and inset cool completely, or dip them into water to cool more quickly.
[*
black] Insert the heat set insertsinset into the layer cooling fan shroud with a soldering iron.
[* icon_note] The soldering iron heats the inset so that it melts the plastic as it's inserted into the printed hole.