Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Wait until the screw and inset cool completely, or dip them into water to cool more quickly.
[*
black] Insert the inset into the top of the holes in the layer cooling fan shroud and apply heat with athe tip of the soldering iron.
[* icon_note] The soldering iron heatsblack] Once the inset so thatis heated enough, it melts the plastic as it's insertedwill slide into place.
[* black] Repeat for
the printed holeother three insets.
[* icon_caution] Wait until the screw and inset cool completely, or dip them into water to cool more quickly.
[*
black] Insert the inset into the top of the holes in the layer cooling fan shroud and apply heat with athe tip of the soldering iron.
[* icon_note] The soldering iron heatsblack] Once the inset so thatis heated enough, it melts the plastic as it's insertedwill slide into place.
[* black] Repeat for
the printed holeother three insets.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added