Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* yellow] Using a 1.5mm hex key, remove the two M2 screws securing the X-axis endstop to the stock layer cooling fan shroud and lay the endstop aside with the wires still connected.
[* blue] Set the washers aside for reuse, but screw the screws back in to place temporarily after the endstop has been removed. We will use them to remove the insetsinserts in the next step.
[* blue] Set the washers aside for reuse, but screw the screws back in to place temporarily after the endstop has been removed. We will use them to remove the insetsinserts in the next step.