Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* green] Remove the two hex 3mm bolts securing the extruder mount plate to the extruder body and set the plate aside.
[* icon_note] Make sure to keep the screws as they will be reused for reassembly.
[* red] The stock hex mount plate is not reused and will be replaced with the newly printeda new part.
[* red] The stock hex mount plate is not reused and will be replaced with the newly printeda new part.
[* blue] The hot end can now be completely removed.