Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* greenlight_blue] Using a 3mm hex key, remove the two M4 bolts securing the extruder mount plate to the extruder body and set the plate aside.
[* greenlight_blue] Using a 3mm hex key, remove the two M4 bolts securing the extruder mount plate to the extruder body and set the plate aside.
[* icon_note] Make sure to keep the screws as they will be reused for reassembly.
[* red] The stock hex mount plate is not reused and will be replaced with a new part.
[* bluegreen] The hot end can now be completely removed.
[* bluegreen] The hot end can now be completely removed.

Image 3

Old Version

New Version