Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* light_bluegreen] Remove the two hex 3mm bolts securing the extruder mount plate to the extruder body and set the plate aside.
[* light_bluegreen] Remove the two hex 3mm bolts securing the extruder mount plate to the extruder body and set the plate aside.
[* red] The stock hex mount plate is not reused and will be replaced with the newly printed part.
[* blackblue] The hot end can now be completely removed.
[* blackblue] The hot end can now be completely removed.

Image 3

Old Version

New Version