Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* blackorange] Remove the two hex 2.5mm screws securing the layer cooling fan shroud.
[* black] With the endstop still attached to the
shroud and the endstop wires still attached to the harness, lay the shroud off to the side.
[* blackorange] Remove the two hex 2.5mm screws securing the layer cooling fan shroud.
[* black] With the endstop still attached to the
shroud and the endstop wires still attached to the harness, lay the shroud off to the side.

Image 1

No previous image

Added