Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* red] RemoveUsing a 2.5mm hex key, remove the two hex 2.5mmM3 screws securing the layer cooling fan and lay the still-connected fan off to the side.
[* red] RemoveUsing a 2.5mm hex key, remove the two hex 2.5mmM3 screws securing the layer cooling fan and lay the still-connected fan off to the side.
[* green] Reinstall the screws into the layer cooling shroud. They will be used to extract the insets for reuse in a few steps.