Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two hex 2.5mm screws securing the layer cooling fan and lay the fan off to the side.
[* icon_note] Make sure to keep[* green] Reinstall the screws as theyinto the layer cooling shroud. They will be reusedused to extract the insets for reassemblyreuse in a few steps.
[* icon_note] Make sure to keep[* green] Reinstall the screws as theyinto the layer cooling shroud. They will be reusedused to extract the insets for reassemblyreuse in a few steps.