Site Navigation

Your Account

Choose Language

Changes to Step #35

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Edit Printer's Firmware
[* black] The new E3D hotend is 5.5mm longer than the old Hexagon. We need to make an adjustment to the firmware file so that the printer knows its own total Z axis height and does not crash into the bed or wiping surface.
[* orange] On line 388 of Configuration.h, change the value of Z_MAX_POS from 159 to 153.3153.5.
[* orange] On line 388 of Configuration.h, change the value of Z_MAX_POS from 159 to 153.3153.5.
[* icon_note] The firmware for the mini can be found on the USB stick that came with your printer or directly from [http://download.lulzbot.com/Mini/1.0/software/firmware/|Lulzbot's site]. It may be easier to download the folder via [ftp://download.lulzbot.com/download/lulzbot/Mini/1.0/software/firmware/|ftp].
[* icon_note] Complete instructions for flashing the firmware can be found on [https://ohai-kit.alephobjects.com/project/firmware-flashing/|Lulzbot's site].