Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #35

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] UploadEdit Start G-Code
[* black] The
new firmwareE3D hotend is 5.5mm longer than the old Hexagon. We need to make some adjustments so that it does not crash when trying to wipe the nozzle
[* black] FortunatelyEdit the HexagonStart G-Code and E3D useadd the same thermistor, however depending on how you wiredfollowing line after the cooling fanfirst G28
[* black] G92 Z153.5
[* black] Optionally,
you may need to changecan adjust the fan configurationmax Z height in the firmwarefirmware configuration.
[* black] We should provide the modifiedThe firmware files, but also describefor the exact changes we mademini can be found at http://download.lulzbot.com/Mini/1.0/software/firmware/ or on the USB stick that came with your printer.
[* black] On line 388 of Configuration.h, change Z_MAX_POS from 159 to 153.3
.
[title] UploadEdit Start G-Code
[* black] The
new firmwareE3D hotend is 5.5mm longer than the old Hexagon. We need to make some adjustments so that it does not crash when trying to wipe the nozzle
[* black] FortunatelyEdit the HexagonStart G-Code and E3D useadd the same thermistor, however depending on how you wiredfollowing line after the cooling fanfirst G28
[* black] G92 Z153.5
[* black] Optionally,
you may need to changecan adjust the fan configurationmax Z height in the firmwarefirmware configuration.
[* black] We should provide the modifiedThe firmware files, but also describefor the exact changes we mademini can be found at http://download.lulzbot.com/Mini/1.0/software/firmware/ or on the USB stick that came with your printer.
[* black] On line 388 of Configuration.h, change Z_MAX_POS from 159 to 153.3
.
[* black] Lulzbot has instructions on firmware flashing [https://ohai-kit.alephobjects.com/project/firmware-flashing/|here].