Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #35

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] Edit Start G-CodePrinter's Firmware
[* black] The new E3D hotend is 5.5mm longer than the old Hexagon. We need to make some adjustmentsan adjustment to the firmware file so that itthe printer knows its own total Z axis height and does not crash when trying to wipeinto the nozzlebed or wiping surface.
[* black] Edit the Start G-Code and add the followingorange] On line after388 of Configuration.h, change the first G28
[* black] G92 Z153.5
value of Z_MAX_POS from 159 to 153.3.
[* black] Optionally, you can adjust the max Z height in the firmware configuration.
[* black
icon_note] The firmware for the mini can be found at http://download.lulzbot.com/Mini/1.0/software/firmware/ or on the USB stick that came with your printer.
[* black] On line 388 of Configuration.h, change Z_MAX_POS
printer or directly from 159[http://download.lulzbot.com/Mini/1.0/software/firmware/|Lulzbot's site]. It may be easier to 153.3download the folder via [ftp://download.lulzbot.com/download/lulzbot/Mini/1.0/software/firmware/|ftp].
[* black] Lulzbot hasicon_note] Complete instructions on firmwarefor flashing [https://ohai-kit.alephobjects.com/project/firmware-flashing/|herethe firmware can be found on [https://ohai-kit.alephobjects.com/project/firmware-flashing/|Lulzbot's site].
[title] Edit Start G-CodePrinter's Firmware
[* black] The new E3D hotend is 5.5mm longer than the old Hexagon. We need to make some adjustmentsan adjustment to the firmware file so that itthe printer knows its own total Z axis height and does not crash when trying to wipeinto the nozzlebed or wiping surface.
[* black] Edit the Start G-Code and add the followingorange] On line after388 of Configuration.h, change the first G28
[* black] G92 Z153.5
value of Z_MAX_POS from 159 to 153.3.
[* black] Optionally, you can adjust the max Z height in the firmware configuration.
[* black
icon_note] The firmware for the mini can be found at http://download.lulzbot.com/Mini/1.0/software/firmware/ or on the USB stick that came with your printer.
[* black] On line 388 of Configuration.h, change Z_MAX_POS
printer or directly from 159[http://download.lulzbot.com/Mini/1.0/software/firmware/|Lulzbot's site]. It may be easier to 153.3download the folder via [ftp://download.lulzbot.com/download/lulzbot/Mini/1.0/software/firmware/|ftp].
[* black] Lulzbot hasicon_note] Complete instructions on firmwarefor flashing [https://ohai-kit.alephobjects.com/project/firmware-flashing/|herethe firmware can be found on [https://ohai-kit.alephobjects.com/project/firmware-flashing/|Lulzbot's site].

Image 1

No previous image

Added