Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] Remove old hotend
[* black] Pretty simple.Remove the following wires from the harness:
[* black]
Two bolts on(thick red) to the bottom ofheater cartridge
[* black] One (thick red) to the nozzle for bed leveling
[* black] Two (thin, one black and one red) to the heatsink blower fan
[* black] Two (thin, one black and one red) to
the extruder hold everything together.hotend thermistor
[* black] Pretty simple.Remove the following wires from the harness:
[* black]
Two bolts on(thick red) to the bottom ofheater cartridge
[* black] One (thick red) to the nozzle for bed leveling
[* black] Two (thin, one black and one red) to the heatsink blower fan
[* black] Two (thin, one black and one red) to
the extruder hold everything together.hotend thermistor