Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] Remove the old hotend
[* black] Remove the following wires from the harness:
[* black] Pins 5, 6: Two (thick red) to the heater cartridge
[* black] Pins 9, 10: Two (thin, one black and one red) to the heatsink blower fan
[* black] Pins 17, 18: Two (thin, one black and one red) to the hotend thermistor
[* black] To remove a pin, push in on the small metal tab on the side of the harness then push down on the pin with a flat object and pull the wire free.
[* black] Pin diagram from Lulzbot's documentation: http://download.lulzbot.com/Mini/1.0/ohai-kit/printhead_assembly.html
[* icon_reminder] Pictures for extracting pins.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added