Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[title] Connect your AVR programmer
[* light_blue] The In-circuit Serial Programming (ISP) header is located on the edge of the board, next to the USB port.
[* orange] Pin 1 is in the top right corner in this picture.
[* black] Follow the instructions provided with your AVR programmer to connect it to the ISP header. If you are using the Bus Pirate, here are the [http://dangerousprototypes.com/docs/Bus_Pirate_AVR_Programming|connection instructions].
[* black] If your programmer has the option to choose between 3V and 5V, choose 5V.
[* black] Plug your AVR programmer into your computer.