Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged

Step Lines

[title] Splice the heat sink fan wires
[* black] Strip 2 cm from the ends of the yellow and purple wires that were connected to the original heat sink fan.
[* black] Cut two pieces of 3 cm long heat shrink tubing and slide them onto the yellow and purple wires.
[* black] Twist the yellow and purple wires to the red and black wires from a connector you prepared in the last step.
[* black] Yellow goes to red.
[* black] Purple goes to black.
[* black] Solder the connections.
[* black] Slide the heat shrink tubing down over the connections and use a heat gun to shrink it.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added