Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Tyler Anderson

Edit approved by Tyler Anderson


Step Lines

[title] Prepare wires for splicing
[* icon_note] We now need to splice the proper connectors onto the printers wiring. We will use the connectors from the wires that came in the E3D kit.
[* black] You can use a zip tie to hold the sheath out of the way while you work.
[* black] Take the two wires provided in your E3D kit and cut a 10 cm length from each. Use the end with the large connector.
[* black] Strip 2 cm from the ends of the wires.