Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Before
After
Unchanged

Step Lines

[title] Prepare wires for splicing
[* black] Pull backicon_note] We now need to splice the sheath to expose as much ofproper connectors onto the printers wiring. We will use the connectors from the wires as possiblethat came in the E3D kit.
[* black] Pull backicon_note] We now need to splice the sheath to expose as much ofproper connectors onto the printers wiring. We will use the connectors from the wires as possiblethat came in the E3D kit.
[* black] You can use a zip tie to hold the sheath out of the way while you work.
[* black] Take the two wires provided in your E3D kit and cut a 10 cm length from each. Use the end with the large connector.