Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged

Step Lines

[title] Prepare wires for splicing
[* black] Pull back the sheath to expose as much of the wires as possible.
[* black] You can use a zip tie to hold the sheath out of the way while you work.
[* black] Take the two wires provided in your E3D kit and cut a 10 cm length from each. Use the end with the large connector.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added