Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Tyler Anderson

Edit approved by Tyler Anderson


Step Lines

[title] Connect the bowden tube
[* black] Check the end of the bowden tube and make sure that it is not plugged with plastic. Also ensure that the end is cut square.
[* black] If your bowden tube is worn, then you may consider replacing it with the new tube provided in your E3D kit.
[* black] Insert the tube into the new hot end. Make sure that it goes all the way in.
[* black] Put the blue locking clip in place under the black ring.

Image 1

No previous image


Image 2

No previous image