Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged

Step Lines

[title] Attach the new hot end and clamp
[* black] Fit the new E3D hot end into the groove mount.
[* black] Orient the hot end so that the wires are coming out the left side.
[* black] Fit the clamp piece in place and screw it down using two M3x14 screws.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added