Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged

Step Lines

[title] Install heat set inserts
[* black] Use the soldering iron to press in the two M3 heat set inserts in the front of the base piece.
[* icon_note] These are for attaching the hot end clamp.
[* black] Use a knife to cut away any excess plastic that gets pushed ourout around the edge of the insert.
[* black] Use a knife to cut away any excess plastic that gets pushed ourout around the edge of the insert.
[* black] See our article for more information on [https://www.matterhackers.com/articles/fasteners-for-3d-printing|how to use heat set inserts].