Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged

Step Lines

[title] Disconnect the original hot end
[* black] Remove the bowden tube by pushing the white collet ring down while pulling the tube up.
[* icon_reminder] You will not be able to remove the tube if you have left filament in the printer.
[* black] Cut the red wires going to the heater.
[* black] Cut the white wires going to the thermistor.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added