Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Tyler Anderson

Edit approved by Tyler Anderson

Deleted
Added
Unchanged

Step Lines

[title] Preperation
[* black] Before beginning, makeproceeding, you should first assemble your E3D v6 All Metal HotEnd. Follow [https://e3d-online.dozuki.com/Guide/V6+Assembly/6|E3D's assembly guide]. Stop at step 24. The steps after that will be completed as part of this guide.
[* black] Make
sure that you have printed all of the necessary parts.
[* black] Before beginning, makeproceeding, you should first assemble your E3D v6 All Metal HotEnd. Follow [https://e3d-online.dozuki.com/Guide/V6+Assembly/6|E3D's assembly guide]. Stop at step 24. The steps after that will be completed as part of this guide.
[* black] Make
sure that you have printed all of the necessary parts.
[* black] If necessary, heat the hot end in order to remove any filament from the hot end and Bowden tubing. Take any spools off the spool holder.
[* black] Turn off the printer and unplug the power cord.