Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* black] Navigate to SETTINGS[http://wiki.mattercontrol.com/Settings/Printer/Custom_G-Code|SETTINGS -> Printer -> Custom G-CodeG-Code].
[* black] AddIn the [http://wiki.mattercontrol.com/Settings/Printer/Custom_G-Code/Start_G-Code|'Start G-Code'] field, add the command 'G29' (no quotes) after the last line in 'Start G-Code'line.
[* black] Navigate to SETTINGS[http://wiki.mattercontrol.com/Settings/Printer/Custom_G-Code|SETTINGS -> Printer -> Custom G-CodeG-Code].
[* black] AddIn the [http://wiki.mattercontrol.com/Settings/Printer/Custom_G-Code/Start_G-Code|'Start G-Code'] field, add the command 'G29' (no quotes) after the last line in 'Start G-Code'line.