Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* black] From the MatterControl main screen, navigate to 'Settings[http://wiki.mattercontrol.com/Options|'Settings & Controls' -> OPTIONS -> CalibrationOPTIONS].
[* black] Switch SoftwareIn the Calibration section, switch [http://wiki.mattercontrol.com/Options/Software_Print_Leveling|Software Print LevelingLeveling] to off.
[* black] From the MatterControl main screen, navigate to 'Settings[http://wiki.mattercontrol.com/Options|'Settings & Controls' -> OPTIONS -> CalibrationOPTIONS].
[* black] Switch SoftwareIn the Calibration section, switch [http://wiki.mattercontrol.com/Options/Software_Print_Leveling|Software Print LevelingLeveling] to off.