Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* violet] Navigate to OPTIONS.
[* yellow] You should now see the Calibration section with Software[http://wiki.mattercontrol.com/Options/Software_Print_Leveling|Software Print LevelingLeveling] accessible. You can enable it, or configure it for use then enable it.
[* yellow] You should now see the Calibration section with Software[http://wiki.mattercontrol.com/Options/Software_Print_Leveling|Software Print LevelingLeveling] accessible. You can enable it, or configure it for use then enable it.