Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #30

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Moment of Truth
[* black] Everything's connected. Flip the printer's power switch.
[* icon_note] The green light inside the USB portLCD screen should light upshow the normal boot sequence and the E3D hot end heat sink fan should start spinning.
[* icon_note] The temperature readings for both the hot end and heated bed will be 0°C until the correct firmware is uploaded.
[* icon_note] The green light inside the USB portLCD screen should light upshow the normal boot sequence and the E3D hot end heat sink fan should start spinning.
[* icon_note] The temperature readings for both the hot end and heated bed will be 0°C until the correct firmware is uploaded.