Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[* black] Insert the hotendhot end and plateextruder assembly into the carriage plate as shown.
[* icon_note] New line.The hotend will fit butblack] Fit the heat sink shroud will rub against the inside curvetop of the carriage plate. Not to worry--hot end into the bolts incircular indentation on the extruder assembly and reinstall the next step will hold everything togethertwo M4 screws from earlier.
[* black] Insert the hotendhot end and plateextruder assembly into the carriage plate as shown.
[* icon_note] New line.The hotend will fit butblack] Fit the heat sink shroud will rub against the inside curvetop of the carriage plate. Not to worry--hot end into the bolts incircular indentation on the extruder assembly and reinstall the next step will hold everything togethertwo M4 screws from earlier.

Image 1

No previous image

Added

Image 2

No previous image

Added