Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by MatterHackers

Edit approved by MatterHackers


Step Lines

[title] Extract the inserts for reuse
[* icon_note] If you have extra M3 inserts, you can skip this step.
[* icon_note] This step is best done with the shroud in a bench vice.
[* black] Using the soldering iron, heat up one of the screws until you can pull both it and the insert out of the stock shroud.
[* black] Repeat for the other three screws and inserts.
[* icon_caution] Before handling, wait until the screw and insert cool completely or dip them into water to cool them more quickly.

Image 1

No previous image


Image 2

No previous image