Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Ryan Lutz

Edit approved by Ryan Lutz

Deleted
Added
Unchanged

Step Lines

[title] Install pins on the E3D HotEnd
[* black] Cut the wires down to approximately 22cm in length and strip 8mm off125mm from the ends.
[* black] Crimp on
top of the pinsheat sink fan as shown.
[* black] Cut the wires down to approximately 22cm in length and strip 8mm off125mm from the ends.
[* black] Crimp on
top of the pinsheat sink fan as shown.

Image 1

Deleted

Image 2

Deleted