Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by MatterHackers

Edit approved by MatterHackers

Deleted
Added
Unchanged

Step Lines

[* black] Strip 4-6mm off the end of each wire.
[* black] InstallCrimp the Molex male terminal pins ononto each wire.
[* black] The pins have two sets of tabs. Use a set of needle nose pliers to fold the inner tabs over the bare wire. Fold the outer tabs over the insulation.
[* black] For extra security, solder the pins onto the wires.
[* black] InstallCrimp the Molex male terminal pins ononto each wire.
[* black] The pins have two sets of tabs. Use a set of needle nose pliers to fold the inner tabs over the bare wire. Fold the outer tabs over the insulation.
[* black] For extra security, solder the pins onto the wires.

Image 2

Old Version

New Version

Image 3

No previous image

Added