Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Ryan Lutz

Edit approved by Ryan Lutz


Step Lines

[title] Extract the inserts for reuse
[* icon_note] If you have extra M3 inserts, you can skip this step.
[* icon_note] This step is best done with the shroud in a bench vice.
[* black] Take one of the four screws from the layer fan and screw it in to one of the inserts, leaving enough length to grip it with a pair of needle-nose pliers.
[* black] Heat up the screw with a soldering iron and apply upward pressure with the pliers until the insert comes out.
[* icon_caution] Before handling, wait until the screw and insert cool completely or dip them into water to cool them more quickly.
[* black] Repeat for the other three inserts.